Centering Cell

The centring cell has the two thread insert connections on each side; one for the input and one for the output. By adjusting the 3 screws in the body side, it is possible to laterally adjust one with respect to the other, either to precisely align the output to the beam or to introduce a deliberate offset. Note that the screws need to be loosened on one side before those opposite can be screwed inwards. All 3 screws must be tightened once the adjustment is made.

  • Lateral adjustment of beam
  • Precisely align the output beam, or introduce a deliberate offset
Part NumberDiameterLength
C-CC100 mm25 mm

Quality Assured.

ULO Optics is an ISO certified company and quality is at the heart of everything we do.  With a host of industrial affiliations you can rely on ULO to deliver.

Diversification into 1 micron optics

ULO Collaborate on the LaserSnake2 project, developing laser cutting optics for safe, remote cutting in air and in water, focused on nuclear decommissioning.